Skip to main content

Why should we use shot blasting?

In any modern metal or construction industry like metal, auto, shipbuilding, railroads, foundries, and many more, you will find that the shot blasting process is utilised for various needs. In the shot blasting process, different abrasives like stainless steel round cut wire shot, sand, and others are used.This process has become crucial in all-metal industries, to remove scale, erosion, and rust. In this article, we will share with you some of the advantages of using the shot blasting process.

Main benefits of using the shot blasting process

There are several advantages of using the short blasting process for various tasks in the metal as well as construction industries. We have listed some of these advantages here for your ready reference.

It helps in removing corrosion

You can quite easily remove rust and other material from the surface of metals to extend the life of the metallic component. If you want to remove the rust, paint, synthetic stain, and scale from the metal surface through the manual method then it would take a long time that would, in turn, increase the cost. On the other hand,you can do the same job through the shot blasting method in which the cut wire abrasives are forcefully thrown on the surface to clean it of any unwanted matter in a very short time. This not only helps you to save the time you would have otherwise spent on the cleaning process but also the cost associated with it.

It helps in creating a surface arrangement

In the metal industry, you have to paint the surface of the metal sheets, electroplate it, or put a corrosion resistance layer on the top. To improve the adhesion quality, you have to create a surface arrangement that would allow the paint and other layers to stick to the surface more strongly. When you hit the surface of the metal with cut wire shots then it creates an etching, which improves the adhesion properties significantly. This in turn improves the life of the metal surface.

It is not harmful to the environment

The shot blasting method is also environmentally friendly compared to other processes in which you use strong chemicals to clean the metal surface of any synthetic stain, paints, or rust. In the shot blasting process, no acids or synthetic compounds are used. The cleaning agent is the abrasive thatcan be reused many times over, whichnot only saves the environment but also minimising both the maintenance as well as operational cost. Any dust that is produced in the shot blasting process is removed through an inbuilt vacuum that after the process is finished can be taken away and disposed of safely.

The information we have shared with you in this article clearly shows that the shot blasting process is not only faster, cheaper but is also environmentally friendly. Thanks to these advantages, the shot-blasting process has a huge demand in multiple industries for various applications.

Website: http://suntecenterprises.com/

Resource: https://suntecenterprisesindia.medium.com/why-should-we-use-shot-blasting-b2e461130900

Labels:
Location: Faridabad, Haryana, India

Comments

Post a Comment

Popular posts from this blog

Always Prefer Quality over Price When Selecting the Right Steel Shot

In many industries, steel abrasives, steel shots and steel grits are widely used to clean the surface of metal sheet, rubber, or any other material in a fast and cost-effective manner. Most of the time materials like copper cut wire shots , or aluminium cut wire shots are used for either cleaning or physical modification of a surface. At the same time conditioned carbon steel cut wire shots are used as a preparatory process for metal surface cleaning. In such metal surfaces scales, dirt, paint coatings or rust are cleared off. Additionally, the steel shots are also used for physically modifying the metal surface (like roughening it up) so that better application of paint and coating can take place on it. This shows how important steel shots are in many industrial processes. However, many manufacturing companies when trying to source steel shots from the market look for the cheapest option available. This is done to minimise the cost. However, this can have a big impact on the o...
1 comment
Read more

What Are The Advantages Of Using Steel Abrasive?

Industries all around the world use shot blasting with steel abrasives to clean the surfaces of metal sheets (it is also sometimes used on other non-metallic surfaces). The popularity of using stainless steel shots in the industrial sector is due to three factors; it is highly economical, it does not harm the environment extensively and you can remove contaminants from the surface in a very short period. In this article, we will discuss with you some of the important applications of cut wire shot in the industry . What are the industrial applications of stainless steel shots ? 1). Still, shots are extensively usedto clean the surface of any metal sheet to clean any loose materials, paint coatings, or rust. This type of cleaning is widely used in those industries, wherein you have to clean large surfaces in a very short period like shipping, automobiles et cetera. 2). Steel grits are also widely used to cut through hard stones quickly, which is not possible through tradi...
Post a Comment
Read more

What are The Different Types of Abrasives for Cleaning Purposes?

  In the industry, abrasive shots are widely used to clean, smoothened, deform, stripping, peening and shaping the metal surfaces. There are different types of abrasive elements. These are classified as; shots, grits, and glass beads. Amongst these, cut wire shot is widely used to clean the metal surface for subsequent processing. The three main categories of abrasives and their uses are as follows. 1). Shots: In this category, you will find various kinds, including stainless steel shots , SS shots, steel cut wire shots, zinc cut wire shots, and others are used in the shot blasting process. Amongst these, steel shots are mainly used for cleaning of metal surfaces from dirt, rust, paint coatings, and mill scale. These shots are also used to modify the metal surface so that paint coating can easily stick to it. Cut wire shots are used in blast cleaning, vibratory finishing, as well as shot peening. Cut wire shots can be made with zinc, copper, aluminium and other m...
Post a Comment
Read more